Dan-dugan-sound-design E-2 Bedienungsanleitung PDF herunterladen (Seite 20)

Dugan Model E-2 User Guide

Analog

Move the ANA-DIGI switch to ANA (up position).

If you do not need the Dugan Music System, twelve channels of automixing are avail-

able using all three DB25 connectors.

The content of the

AUDIO I/O 9–12 DB25 connector depends on the state of the #ch

switch. This can be set in the Dugan Control Panel (see Chapter 4: Dugan Control Pan-

el) or with a power-up command (see Appendix A: Power-up Commands).

+4/-10

This sets the input sensitivity, internal headroom, and output level between profes-

sional (+4) and consumer (-10) audio line levels.

8-Ch

• Eight automix channels on the AUDIO I/O 1–4 and AUDIO I/O 5–8 DB25 connectors

• Three Music System threshold inputs on the AUDIO I/O 9–12 (channels 9–11)

Channel 12 is an auxiliary input sent to the mix bus matrix.

• Four mix bus outputs on AUDIO I/O 9–12 (channels 9–12)

• Linking available on LINK IN, LINK OUT

• Unprocessed outputs are available on AUD OUT

NOTE: Since relays route the audio input signals for channels 1–12 directly to their respective

outputs when the unit is off, you can leave it patched when not in use.

12-Ch

• Twelve automix channels on all three DB25 connectors

• Linking available on LINK IN, LINK OUT

• Music System and mix buses not available

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Keine Kommentare

Dan-dugan-sound-design E-2 Bedienungsanleitung Seite 20