Dan-dugan-sound-design E-1 Bedienungsanleitung PDF herunterladen (Seite 13)

Dugan Models E-1 and E-1A User Guide Quickstart

To execute a power-up Reset command, hold the channel 1 bypass button down dur-

ing power-up. This sets all parameters to factory default settings and clears label text.

We recommend executing a Reset command (just like “zeroing out” a console) before

starting a new installation.

Linking Multiple Dugans

Up to eight Dugan units can be linked into a single automatic mixing system. One

unit must be set to be the master and the others slaves.

Figure 2-3 Linking multiple Dugans

1. Designate one unit as the master by setting the NORM-SLAVE switch on the rear

panel to NORM (up).

2. Designate any other units as slaves by setting their NORM-SLAVE switches on the

rear panel to SLAVE (down).

3. Use ADAT (Toslink) cables to link units in a ring network (see above).

Note that all LINK IN and OUT connectors are used to create the ring.

NOTE: Due to the Model E-1A’s compact size and close spacing of the ADAT connectors, some large

cables may not fit. The maximum cable width is 0.48 in (12 mm).

NOTE: Linked Model E-1s appear in group a only. Linked Model E-1As can use groups a–c.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Keine Kommentare

Dan-dugan-sound-design E-1 Bedienungsanleitung Seite 13